This four-conductor screened instrumentation and control cable features tinned copper conductors, an overall aluminium foil shield, and an integral drain wire, engineered for low-noise analogue signal and audio transmission in industrial and commercial installations.
Type: Multi-Conductor Overall Screened Beldfoil Shielded Instrumentation and Control Cable
Length: Supplied in standard continuous spools, typically 100 ft, 500 ft, and 1000 ft reels
Colour: Chrome Grey Outer PVC Sheath with White, Black, Red, and Green Core Conductors plus a bare tinned copper Drain Wire
Function: Transmits low-voltage analogue signals, sensor loops, line-level audio, intercom signals, and control circuits while protecting against electromagnetic and radio frequency interference
Design: Four stranded tinned copper conductors, polypropylene or PVC core insulation, overall 100 per cent coverage Beldfoil aluminium-polyester foil shield, 20 AWG stranded tinned copper drain wire, and a durable PVC outer jacket
Connector size: 4-core cable referencing 0.75 mm² / 18 AWG to 20 AWG class sizing (approx 0.75 mm² / 18 AWG with 19x30 or 16/0.25 stranding; Belden 18 AWG 4-conductor shielded series); nominal outer diameter 6.2 mm to 6.7 mm; voltage rating 300V RMS
Ends: Cut ends ready for outer jacket stripping, drain wire grounding or pig-tailing, and termination to terminal blocks, screw terminals, solder cups, or circular connector crimp pins
Protection: 100 per cent foil shield coverage for complete electrostatic and RF noise suppression, flame retardant to UL 1685 and UL VW-1, rated for operating temperatures from -20°C to +60°C UL or -20°C to +80°C
Application: Analogue sensor wiring, control consoles, intercom systems, industrial instrumentation, process automation loops, and electronic equipment interconnects
Manufacturer: FS Cables
